Muslin Take 2 - Butterick 5895

Well, y'all, today went better than yesterday's horrific pant ordeal. This rainy afternoon I managed to make the size 14.  This time I used the cotton sateen that will be my final pair of pants (I bought twice as much as I needed so I could make a muslin in my actual fashion fabric.)  The fit was much better, in that I could get the pants around my body:


Working with this stretch cotton sateen was a LOT easier to work with than the stiff twill stretch icky stuff I used yesterday:


 It was soft, and much easier to pin.  Just like yesterday, I sewed my outside seams so the allowances were on the outside, for future fitting purposes.


 These photos don't really show the true greeness of this fabric - they are a little washed out and make the fabric look a little minty instead.


Here's a shot with flash:


 I'm no expert on fitting pants, but I suspect I need a little extra room in the high hip, a little less fabric in the front rise, and a little extra in the back rise.  But I don't know - it's hard for me to tell without a waistband attached.  


I timed myself this go around, and from the time I sat down and sewed my first stitch on this muslin until I finished the zipper was one hour and sixteen minutes.  Now, I didn't finish seam allowances, or do the waistband, or hem, but still:  these pants are a quick make.  One thing I did do that I didn't do yesterday, I edgestitched and topstitched the front pockets to see if I like it.  Verdict:  I like the edgestitching but the topstitching, not so much.


 Here's a photo that shows more of the true green!


I pray this gives Gertie something to work with while fitting this coming weekend.  I'm hoping these pants become my sloper for any pants in the future!
Read More

Goin' to See Gertie - Butterick 5895

I'm going to Gertie's sewing retreat next weekend which I'm pretty excited about (I leave Friday), and the consensus was that pants should be my project for the weekend.  Vicki pointed out that having the opportunity to have someone help me fit my first pair of pants - by the person who drafted the pattern, no less - was an opportunity not to be wasted.  Butterick published Gertie's pattern for a pair of peddle pushers last year:


I wouldn't say it's my style, but it is an easy pair of pants - the zipper is in the back seam, and a good place to start.  I bought the smaller sized pattern that went up to size 12 because size 12 in the Big Four is my usual pattern size.  I plan to make my pants from a gorgeous green stretch cotton sateen I got from, where else?, Gorgeous Fabrics.  

Gertie recommended to the retreat group that we make a muslin prior to our arrival, so we can maximize our time fitting and sewing.  This is my last weekend to make my muslin (nothing like waiting until the last minute to do my homework . . .).  So this morning, I looked at the pattern.

Huh.  Those size 12 finished measurements printed on the pattern look kinda small.  But I'm going to use a stretch fabric, right? That's going to affect fit.  But still.  Those are small measurements.

So in abundance of caution, I went to Hancocks to get the larger size pattern that contained size 14.  Of course, the Butterick patterns weren't on sale today, so the pattern cost me $ 11.00 as opposed to the $ 1.99 I spent on the first one a few weeks ago.  I also bought some stretch twill pictured under the pattern as my muslin fabric.  When I got home, I decided to give the size 12 a try - if it worked, then I could return the larger, $ 11 pattern.

Well, y'all, I can say that the size 12 is definitely too small.  I'm glad I muslined it.  It saved me some major embarrassment at the retreat.  And it wasn't that bad to make.  I didn't worry about topstitching or finishing or trimming seams.  I didn't attach the waistband.  It went pretty quickly.

And then I tried it on.  Well, I tried to try it on.  

To say it was snug was an understatement.  It took a lot of strength to get the zipper up.  I can't believe I'm going to show you my fat behind, but since this is in the interest of science, dear readers, I will sacrifice my dignity:



You can see that I sewed the side seams wrong sides together so the seam allowances are on the outside.  My thinking that I could more easily make alterations, if necessary.  My thinking was correct only if I didn't need like, at least two more inches all the way around:





OK, size 14 is definitely required.  I felt like I needed to lay down after taking these photos with a cool, damp cloth on my forehead.  And never eat again.

I realize this pattern is deliberately close-fit.  I realize that the skirts and dresses I usually make have some fudge factor in them - a precise fit isn't usually required, limited only to how tight you like your skirts.  

So I'm recovering.  Slowly.  I'm trying to learn that no muslin is failure because you learn something as result.  And I've learned to trust the measurements printed on the pattern!

By tomorrow, I'll be recovered enough to make the 14.  Wish me luck.

: )

Read More

New Look 6000 Dress


After finishing the Tippi Hedren suit, I wanted to make another dress to wear with the jacket which I absolutely love.  I wanted to use the rayon/silk blend check on the left below:


I used some of it for the back of my Victorian vest, and wanted to make a simple sheath dress.  I decided to use New Look 6000, which I have made before.  


This time, I made view E (the yellow polka dot version) without the sleeves.  It was an easy make and I made no alterations, just a size 12, straight up.  It was fun because the dress went together quickly which was nice, given all the trouble I had with my Victorian vest. 

The rayon/silk blend was supple, a joy to work with.  I used facings for the armholes which isn't my favorite finishing for armholes, but I felt this drapey fabric needed the added structure.  But upon wearing, I found this stuff wrinkles horribly:




 But I loved the look; the checked fabric was a wonderful match for my wool jacket:


 But well, there is the wrinkling:


And by the end of the day, I discovered that my back center seam was beginning to shred.


Apparently, my rump is just too much for this fabric; I underestimated it's delicate nature.  I'm not certain I will be able to wear this dress much in the future, especially to work as that seam could go at any time!

So not an epic fail, but not a success either.  I have not given up on this fabric; I still believe I can make a non-fitted skirt to wear with this jacket.  But to recover from this project, I'm working on my first shirtdress of 2014!!!  Yes, it's been a while since a shirtdress was made, and I'm in withdrawal.  Onward and upward!

On more exciting news, I discovered that I got into Gertie's Sewing Retreat for the first week of April!  I'm in a complete dither as to what project I should take that needs Gertie's help.  Possibly the Vogue Couture dress which had fitting problems (plus the dress is already made so essentially, it is muslin), or, and this is a wild thought, maybe I should try a pair of pants. Other than some boxers or pj bottoms, I have never made a pair of pants, and Gertie has a pattern out now with a pair.  How cool would it be to learn how to make pants from the person who drafted the pattern???

Still deciding . . .  Any suggestions welcome!
Read More

Folkwear Victorian Vest & Sewing Room Reveal!

It's a snow day here in Richmond, VA, so an opportunity to update what I have been working on the past month or so!  After completing the Tippi Hedren suit, I was left with scraps from my 3 metres of fabric I had bought in Rome.  In an attempt to keep the good time going working with this wool/cashmere blend, I decided to make something from the scraps - no amount of this lovely fabric should go unused.  I scratched my head and came up with the idea of a vest - yes, that's it!  I'll make a vest.  I had large enough scraps for two front pieces, and then I could use a coordinating fabric for the back of the vest.

I've never made a vest before, but I thought it would be a good idea because my workplace has declared Fridays as jeans days, so 20% of my workwear is now jeans.  Making a vest would allow me to wear this yummy fabric on Fridays and weekends.  Yay!  Not being a western type of person, and probably under the influence of too many Downton Abbey episodes, I was thinking Victorian and Folkwear Patterns had one:


I thought the fitted vest on the far left to be the winner - it is shaped for the female figure and looked wonderful.  I planned to use the wool/cashmere fabric for the two fronts and the rayon/silk fabric on the left that I ordered at FabricMart for the back:



It's a vest, right?  How hard can this be???  Pretty hard, I discovered.  It seemed that everything that could go wrong on this seemingly simple project, did.  I mean, beginner sewers often make a vest as a first project and I had just finished the Tippi Hedren suit, drafting my own lining pattern in the process.  I thought I had this.

I was so wrong.  I cut the fronts in a single layer so that I could fit the pattern pieces on the scraps.  In doing so, I found I had failed to flip my pattern piece, so in essence I had cut two right side pieces, but no left.  This wasn't fatal since the right and wrong sides of this wool/cashmere fabric aren't very different, so I just flipped one piece over and declared it fine.  

It was a portent of things to come.  I kept making rookie mistakes, like pressing darts the wrong way.  I used habotai silk for the lining, which I knew would be evil, and it was.  My attempt to find buttons was a fruitless search, so I ended up trying to cover buttons in the wool/cashmere fabric in two sizes, but neither could handle the thickness of the fabric.

And when it was done, I found the waist to be a little small, even though it seemed to fit when I basted everything together prior to the final sewing.  I don't know what happened - maybe I was confused as to where the center front was located.  

But the biggest problem was my failure to recognize that the vest only came to one's waist.  Victorian women wore Victorian vests with Victorian high-waisted skirts.  Which is pretty obvious, right?  But I failed to consider how this would look with jeans, which aren't waist high these days, unless you are wearing the dreaded "mom-jeans" from the 1990s.  My jeans aren't particularly low-rise, but there is a good three inches from where this vest ends and my jeans begin - not a good look.  I searched high and low and found exactly one garment I owned that was high-waisted enough to wear with this vest - a grey Cabi knit maxi skirt.

My enthusiasm to finish this vest that can only be worn with one garment in my wardrobe waned considerably.  Especially after three weekends of work.  So I basically called it a day and gave up on buttons, closing the vest with my cameo pin I got at the Vatican on our Italy trip:



 This solution had the added advantage of leaving the waist free, thus, eliminating the too-tight waist problem.  I used the rayon/silk for my undercollar:



 Here's that nasty habotai silk lining that was a bitch to work with:





 Here's the back, which I did think worked well and looked pretty good.  Ignore the wrinkle, I had been sitting:



 In sum:  the only way this vest is going to get any substantial wear is if I start making Victorian high-waisted skirts, and given my recent steady diet of Downton Abbey, that is a distinct possibility.  At least I now know what adjustments I need to make if I ever make another and that I'll have to make a Victorian skirt go with it.

I do want to make it plain that any problems I had with this pattern is not the fault of Folkwear Patterns - it was all due to user error and the fact that my sewing brain took an enormous holiday during the making thereof.

The other project that has been going on is the transformation of my sewing room!  Until about a month ago, it looked like this:



And now it looks like this:



 Vicki gets all the credit for this; she came over and got me organized!  See the big cabinet in the corner?  That's where my fabric is these days.  And here is The Carpenter's old kitchen table, raise to 35 inches so I have a proper cutting out table in my actual sewing room:



 He sanded down the top for me; I haven't decided whether to leave it unfinished, or prime and paint it.  I'll think on it for a few years.  Here's a book case in the corner holding pressing things and vintage patterns:



 Here are two cubby-hole thingys we got at Home Depot; Vicki came up with the idea of adding a shelf on top of both, providing more horizontal surface area and stablizing the two.  The Carpenter built and painted the top shelf:



Also those blue, yellow, grey, and green baskets are now holding patterns, sewing magazines, buttons, and various notions.  My zippers are on the top shelf, in old flower vases.  And, for the first time ever, I have a full length mirror in the house.  (How did I ever sew without it???):



 Vicki also came up with idea for peg board over the cutting table.  I still haven't quite organized my tools on it:



My pressing area is pretty much the same, but the bookcase provides so much more space to store my pressing items:


I still need to hang my sewing themed artwork, but my picture hanging mojo is low, so I went ahead and took these photos before I completely junk up my beautiful sewing space.  : )  Thank you, Vicki!  And a big shout-out to Tammy, who came over and helped us put all this new furniture together!

Happy sewing, y'all!
Read More

Contact Us

So you think we’re the right folks for the job? Please get in touch with us, we promise we won't bite!



Distributed By Blogger Themes | Designed By Seo Blogger Templates