It's A Sewing Room Miracle! And the Tippi Hedren Suit Progress - Butterick 2178

On Saturday, Vicki came over and helped me figure out how to organize my sewing room.  She saw it over Christmas - in the same state as the day I moved in a year and a half ago - and she became deeply depressed.  The room was full of boxes and bags of crap, I mean, my stuff, and she felt a great disturbance in The Force - the Sewing Force, that is.  Something Had To Be Done.

My problem was that I was paralyzed by choice.  In the past, I sewed where ever I had a flat surface - give me no room and no choice and I can make it happen, but give me a blank canvas and I'm stuck.  A dedicated sewing room seriously messed with my head.

So Vicki loaded up all her organizing skills and unleashed them at my house.  And at my husband.  The Carpenter now has homework, and he knows it.  He's going to hang a peg board for me, elevate an old table, and create a shelf on top of two bookcases we bought on Saturday.  As soon as he does all that, I'll take photos and post them so you can behold the awesomeness that is my new sewing room.

On Sunday, I entered the sewing room and sewed for 12 hours.  I finally stopped about 11:00 pm but only because The Carpenter said, "Time for bed."  Basically, I finished the jacket of the Tippi Hedren suit!  On Sunday morning it was exactly where you saw it last with only the outer jacket constructed, and by 11:00 pm that night it was complete with only the lining hem to hand sew.  I credit Vicki and the new sewing room configuration.

So here it is:




You can see that I went with a peach colored silk charmeuse for the lining.  I dithered long and hard on this lining.  I considered using the lining I bought for the Gertie coat and the yellow skirt (God knows I have enough of it), but I was concerned it might be a little too warm.  I considered washed silk shantung, but I felt it would be too thin.  The charmeuse is lovely, and I had it in my stash, so I went with it.  

I re-did the pockets and I am much happier with them now:





This wool is very forgiving, and left no stitching marks behind, so it was easy to take them off, and re-orient the seam allowance inside the pocket.  It is much flatter now.

I am very proud of the cuffs, especially since I had to figure them out myself - my pattern had no cuffs:



 Here's how I did it:  I measured the width of my sleeve pattern at the bottom edge (14 1/4 inches).  That measurement became the width of my cuff pattern piece.  I knew I wanted my cuffs to be an inch and half wide, so I doubled that number (to three inches) and then I added my seam allowances (2 half inch seam allowances equals 1 inch), for a total of 4 inches.  So my cuff pattern was 14 1/4 inches by 4 inches.  I cut my cuffs from the pattern on the bias.

 I sewed the short 4 inch sides right side together and then turned the cuff right side out.  I folded the cuff in half length-wise, and sewed the two raw edges of the cuff to the inside of the sleeve.  Then I pressed the cuff to the outside of the sleeve.  By doing it this way, the seam joining the cuff to the sleeve is outside the jacket, rather than inside, but it will be covered by the cuff:



 The inside of the sleeve cuff looks clean and neat:



To keep the cuff turned up, I hand tacked it at the back seam of the sleeve and cuff.  (Doing it this way also automatically hems your sleeve lining as well!)

One thing I love about the sleeves on this jacket is the dart at the elbow, something you don't see in a lot of modern patterns:


  
So the lining.  I drafted my own lining pattern.  I don't know if I did it "right".  I did what made sense to me.  Here we go:

For the sleeves, I just used the sleeve pattern pieces with no change.  For the back lining, I used the back pattern piece, but instead of cutting the pattern piece on the fold, I positioned the pattern piece a half inch from the fold of the fabric: 


The extra half inch became my one inch pleat that gave me extra ease in my lining:


The original pattern fold line became my stitching line.  For the first two inches (from the top neckline), I used my regular sewing stitch.  After the first two inches, I went to a basting stitch until I reach 2 inches from the bottom edge, whereupon I went back to my regular stitch length.  After inserting the lining, I took out the basting stitches, thus releasing my pleat.

The front lining pattern piece was the most challenging.  I took the collar/jacket facing pattern piece,


and laid it over the front jacket pattern piece.  Then I traced whatever the collar/jacket facing pattern piece did not cover, but added an half inch where the facing and lining piece will meet when I stitch them together with a quarter inch seam allowance.  This is what I ended up with:



I know, not very exciting.  But it worked.  I didn't sew the darts in my lining pieces (with the exception of the sleeve dart), but I brought the legs together as tucks.  By not sewing the complete darts, I gave my lining extra ease.  

My one "duh" moment came when I prepared to hem the jacket, fully intending to put in a machine hem, when I realized that I would be hemming right through my pockets.  Doh!  A hand stitched hem was a must.  I have to admit that the interlining, again, helped tremendously, and allowed the hem to be truly invisible since I only stitched to the interlining, rather than all the way to the outer wool layer.  

I still have to hand sew the lining hem to the jacket hem.  Getting the lining lined up correctly is a challenge.  Too loose and it sags; too tight and it makes your garment hang funny.  And what looks right on the hanger doesn't necessarily look right on you.  So it is a lot of pinning and trying on.  I think I have it about right now:



I am enormously pleased with how this jacket has turned out.  With the incredibly soft wool/cashmere outer jacket and silk lining, this is an incredibly luxurious garment.  I have never worked with such gorgeous fabric.

Today I started on the dress that will go under the jacket.  As I have mentioned, I'm using McCalls 5972, and I cut it out today.  It won't be underlined, but I lined the bodice with cotton.  Again, this wool is so fantastic, I sort of don't want the sewing to end.  I might be able to make a vest from the scraps I have left, and don't think I won't try.  : )

I did finish the bodice today; here it is hanging from the back of my chair:



You can see one of the purchases Vicki and I made in the background!
Share This

Contact Us

So you think we’re the right folks for the job? Please get in touch with us, we promise we won't bite!



Distributed By Blogger Themes | Designed By Seo Blogger Templates